Here is another project with it`s story for you.

I`we flown RC helicopters for around three years now and only electric. We all know batteries tend to get worn out, which is what who has happened to many of my batteries. They don`t have the same punch as they had, which is essential for good 3D flying. Even tho they are bad for 3D they can still be used for low-amps applications, such as scale flying.

Therefore I`we decided to get myself an scale body for one of my Align T-rex 450 helis, the oldest in fact. At first I bought a Airwolf body, but I didn`t really want an Airwolf and it did miss the tail with retracts. Comanche on the other hand has always impressed me, being «the best» helicopter around with a very long development period.

The build process started by figuring out what scale the heli would become for a T-rex 450. If I recall correctly the 450 has a blade with of 70cm and RAH-66 has 11,9meters. This results in a scale of 1:17. From here I calculate 1:17 length of 13.20m (without gun barrel).

There are very few good pictures of this helicopter from all angles on the internet, but I were able to calculate the tail to be tilted 15 degrees. I also had to do allot of testing of bottom plate and the lower sides to make it scale looking. After the bottom was finish I used a paper-piece and draw the upper body. After I cutting the paper piece out it was easy to make a similar in 6mm depron.

Images

Comanche RAH-66

First video

This entry was posted on Sunday, October 18th, 2009 at 3:25 pm and is filed under Hobby, RC, Tech. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.